Gunstock Refinishing, Restoration & Repair
Refinishing of Wood on Rifles, Shotguns, Handguns, Knife Handles

Custom Gunstock Refinishing at Competitive Pricing

How Pricing is Established:

Once I get your initial email (from the "Contact" page on this website), along with the basics on your firearm, I'll be able to give you a price on restoration. A little further communication between us will help confirm the price.
Emailing me a few digital photos of the gunstock, showing it's flaws, sometimes helps in determining labor involved. Photos aren't usually needed, but sometimes "picture worth 1000 words".

Pricing is firm unless once I have the woodstock in hand I see something unexpected. This hasn't occurred, but it should be mentioned. Also, if once I have the stock in hand I determine for some unexpected reason I can't refinish it, I'll return it to you on my dime.

Current Refinishing Pricing for most gunstocks:

$295 - 385 for most stocks. Amount depends on variables such as type of wood; ease/difficulty of old finish removal; extent and location of dents, gouges, scratches; coats required, etc.

Pricing includes
:


Remove entire old finish from stock and checkering (if applicable). Remove minor dents and scratches.
 
Seal and refinish entire stock with highest quality oil-blend; hand-done from start to finish. 


Optional Considerations:

HYPER-clean the checkering
: add $45.

This process is well worth doing if the checkering is in good shape (no crushed diamonds), but lacks a crisp look because of nearly invisible gunk deep in the checkering cuts.

On checkered stocks, removal of the old finish from the checkering is standard. Many times, however, hand grease and general gunk buildup from years of use are deeply ingrained between the little diamonds of the checkering, making the checkering appear dull, sort of flat.

Although finish removal takes off the thin layer of old finish in the checkering, this gunk is often so impacted in tiny crevices not well sealed by the finish, a lot of it doesn't come out with the finish removal.

Hyper-cleaning is a hand cleaning, deep between all the diamonds. Hyper-cleaning gives restored height appearance to the diamonds by getting the originally cut grooves truly clean, making the checkering 'crisp', looking nearly as good as labor-intense repointing, at a fraction of the cost (see below for info on repointing).

Repoint checkering: to discuss...
• I don't recommend repointing in most cases, preferring to discuss on an individual basis. Let's talk.
• If at all possible, I recommend Hyper-cleaning instead of repointing. Often that's just enough to give new vitality to old, gunked-up checkering. And is much cheaper!

I don't do initial checkering from scratch.

Tough issues:
Note: "Tough Issues" can add to the price, depending on extent of damage.
• Repair deep dents and scratches, gouges, chips, cracks; Remove gun oil in wood.
(See Refinishing page, Tough Issues paragraph, especially noting some deep repairs may result in being visible)

Current turnaround time:
averaging 2-4 weeks, but can vary. Check for current status.
           
Payment:  Payment not required upfront. I notify you to send payment when gunstock refinishing is nearly complete.

The price is forgotten long after the quality remains…